Sea to Summit Neck Wallet RFID
- Free Domestic Shipping On Orders Over $100
- In stock
- Backordered, shipping soon
- Add To Cart For Final Price
Neck Wallet RFID
Neck-Worn Travel Wallet · 5 Pockets · 40 g · 8 × 5 × 1 in
The Neck Wallet RFID is a neck-worn wallet for everyday organization. With five pockets and a slim profile, it carries passports, cards, and small valuables close to the body.
RFID-Blocking Lining (Copper-Nickel Film)
Lined with copper-nickel film that blocks RF signals — protects credit cards, passports, and other RFID-enabled items from digital skimmers. Skimmers are a real threat in crowded tourist areas, airports, and public transit, and the copper-nickel lining creates a Faraday-cage effect inside the wallet.
5 Pockets for Organization
Five pockets for organized storage — dedicate one to passport, one to cash, one to credit cards, one to boarding pass, one to small valuables. Way more organization than the single-compartment Neck Pouch RFID, and way easier to find what you need without dumping the whole wallet.
Soft Webbing Neck Strap
Soft, comfortable webbing neck strap — wear it tight against the skin under a shirt for security, or loose over clothing for quick access. The webbing is soft against the skin and stays in place without irritation on long travel days.
30D Ultra-Sil + Cordura Construction
Built with 30D Ultra-Sil body fabric reinforced with Cordura at high-wear points (strap attachment, zipper stress points, pocket edges) — the Ultra-Sil is light and packable, while the Cordura reinforcement adds years of use life. Same construction as the Neck Pouch RFID but sized for more contents.
Slim Profile for Under-Clothing Wear
Slim profile fits under a shirt or jacket without printing — only 1.4 cm thick, the wallet is unobtrusive when worn against the body. Critical for travel in places where you don't want to advertise that you're carrying valuables.
Will Not Block Smartphone Signals
Will not block smartphone calls — cell phones receive and transmit a much stronger signal than a chip credit card, so the copper-nickel lining doesn't interfere with normal phone use. The wallet protects contactless cards and passports while leaving the phone fully functional.
Light-Dampness Protection (Not Waterproof)
Light-dampness protection, not full waterproof — the wallet will protect contents against damp, low-level moisture like perspiration while worn against the body, but not from significant or consistent external wetness (downpour, submersion, etc.). For rain, store the wallet in a waterproof bag.
Materials & Construction
Materials
Body: 100% Nylon (30D Ultra-Sil + Cordura reinforcement) · RFID Fabric: 100% Polyester (copper-nickel film)
Body Fabric
30D Ultra-Sil nylon with Cordura reinforcement at high-wear points
RFID Lining
100% Polyester with copper-nickel film (Faraday-cage effect)
Pockets
5 (for organized storage of passport, cash, cards, etc.)
Strap
Soft, comfortable webbing neck strap
Construction
Lightweight, slim profile, designed for under-clothing wear
Dimensions & Weight
Dimensions
21 × 13.5 × 1.4 cm / 8 × 5 × 1 in
Weight
40 g / 1.4 oz
Profile
Slim (1.4 cm thick) — designed for under-shirt wear without printing
Use
Best Use
Everyday Use, Travel, International Tourism, Crowded Public Spaces
Protects
Passports, credit cards (contactless/chip), other RFID-enabled items
Does NOT Block
Smartphone calls/texts/data (cell signals are much stronger than RFID chip signals)
Water Protection
Light-dampness only (sweat, light moisture) — NOT waterproof
Hand Wash with Mild Soap
Hand wash the wallet with warm water and mild soap (like Nikwax Tech Wash or diluted dish soap) — machine washing can damage the copper-nickel RFID lining and stretch the slim profile. Open all 5 pockets for thorough cleaning. Rinse gently, squeeze out water, and air dry flat or hanging.
Don't Machine Wash or Dry
Skip the washing machine and dryer — the heat of a dryer can damage the copper-nickel film and the Cordura reinforcement, and the agitation of a machine can separate the RFID lining from the body fabric. Hand wash and air dry only.
Inspect Strap, Pockets & Stitching
Before each trip, check the webbing strap, all 5 pocket seams, and the stitching at the strap attachment — a pocket failure mid-trip means lost contents. The Cordura reinforcement at the strap attachment and the 5 pocket openings are the most common wear points.
Test RFID Blocking Periodically
To test that the RFID blocking is still working, put a contactless credit card in any of the 5 pockets and try to tap it on a payment terminal — the terminal should NOT read the card. If the card reads through, the copper-nickel lining has been damaged and the wallet should be replaced.
Replace If RFID Lining Fails
If the RFID lining develops pinholes, tears, or stops blocking signals (per the test above), the wallet is compromised and should be replaced — there's no field-repair for the copper-nickel film. Replacement is the only option.
Store Dry, Out of Direct Sun
Store the wallet in a dry place out of direct sunlight when not in use — UV can degrade the copper-nickel film over time, and trapped moisture in the pockets can damage the lining and the body fabric. A drawer or travel pouch is fine.
Shipping Policy
Components:
All component items (wheels, drivetrains, suspension, brakes, etc.) ship within 2-5 business days of purchase.
Bicycles:
Complete bikes typically ship within 2–3 weeks due to build, tuning, and inspection times. You will receive tracking information as soon as your order is ready to ship.
Riding Gear & Apparel:
Riding gear and apparel orders (helmets, jerseys, gloves, etc.) ship within 2-5 business days.
Returns & Exchanges:
If you received the wrong size or wish to exchange an item, it must be returned in original condition—unused, uninstalled, and with all packaging intact.
For full details, please see our Refund Policy before initiating a return.
