2027 Volkl Racetiger GS R WC-Plate Ski
Home
Volkl

olkl Racetiger GS R WC-Plate Ski

$799.99
/
Shipping calculated at checkout.
  • In stock
  • Backordered, shipping soon
Color
Size
  • Free Domestic Shipping On Orders Over $150 (Excluding Oversized and Bikes)
  • Add To Cart For Final Price
Völkl Racetiger GS R Skis with WC Plate

The Racetiger GS R with WC Plate is built for ambitious U14 and U16 giant-slalom athletes. Tailored Carbon Tips provide direct, precise shovel response, while two Titanal layers, a beech-and-poplar wood core, and ABS sidewalls supply stability and dynamic rebound. The premounted 10 mm Marker World Cup Interface plate is matched to the ski for power transfer, edge grip, and controlled bending. Bindings are not included.

Precise Carbon Tip Response
Individually positioned carbon fibers control shovel torsion for direct, reliable engagement toward the gate.
World Cup-Inspired Stability
Two Titanal layers and the beech-poplar core deliver damping, edge hold, and dynamic energy through GS turns.
Matched WC Plate
The 10 mm Marker World Cup Interface uses Piston Control and is premounted to preserve the intended flex and power transfer.
Factory Race Tuning
Zebra Structure and GS-specific factory edge angles provide a precise starting point for a racer’s tuning program.

General

Discipline
Giant slalom
Intended Athlete / Use
Ambitious U14 and U16 GS athletes
Available Lengths
174 / 178 / 183 / 188 cm

Shape

Profile
Tip Rocker with camber through the middle and tail
Waist Width
65 mm
Length-Specific Data
Sidecut / turning radius / weight per ski without binding, where published

Length, Sidecut, Radius & Weight

174 cm
104 / 65 / 87 mm · 21 m · 2200 g
178 cm
104 / 65 / 86 mm · 23 m · 2290 g
183 cm
102 / 65 / 86 mm · 25 m · 2330 g
188 cm
101 / 65 / 85 mm · 27 m · 2410 g

Construction

Core
Multilayer beech-and-poplar wood core
Technologies
Tailored Carbon Tips; two full Titanal layers
Sidewalls
Full Sidewall ABS
Base
P-Tex 4504 sintered race base; Zebra Structure
Factory Finish
Race Finish; GS base edge 1.1° and side edge 87.6°

Race Interface

Included Plate
Marker World Cup PC Interface plate, 10 mm
Plate Status
Premounted
Bindings
Not included

Mounting

Included
Skis with Marker World Cup PC Interface plate, 10 mm; bindings not included
Binding Setup
Plate, binding mounting, adjustment, and release testing must be completed by an authorized race technician before use
Drying and Daily Care
Wipe snow and moisture from the skis, plate interfaces, and edges after every training or race session. Dry everything thoroughly with a soft cloth and avoid prolonged storage in a sealed bag or on a wet vehicle rack.
Race Base and Edge Preparation
Inspect the bases and edges for impact damage, burrs, rust, and edge separation. Have a qualified race technician establish and maintain base structure, wax selection, and edge angles for the athlete and course. Do not alter factory edge angles without an intentional tuning plan.
Construction Inspection
Check the topsheet, sidewalls, edges, core, and Titanal-related structural areas for cracks, delamination, or deformation after hard impacts. Remove damaged skis from use until an authorized race technician has assessed them.
Plate and Binding System
Inspect the race plate and mounting screws regularly for looseness, damage, or contamination. Plate and binding mounting, boot-sole verification, adjustment, and release testing must be performed by an authorized race technician. Recheck the complete system after any boot, plate, binding, or mounting change.
Closed-Course Use
These race skis should be used only within their intended athlete category, course environment, and applicable competition rules. Confirm length, radius, plate, binding, and setup compliance with the athlete’s coach or race technician before competition.
Off-Season Storage
Clean and dry the skis, have the edges inspected, and apply protective storage wax to the bases. Store them in a cool, dry place away from sunlight, heaters, and heavy loads, with the binding system checked again before the next season.

Shipping Policy

Components:

All component items (wheels, drivetrains, suspension, brakes, etc.) ship within 4-7 business days of purchase.

Bicycles:

Complete bikes typically ship within 2–3 weeks due to build, tuning, and inspection times. You will receive tracking information as soon as your order is ready to ship.

 Gear & Apparel:

Outdoor Gear and apparel orders (helmets, jerseys, gloves, etc.) ship within 5-21 business days. Please reach out to us with the most up to date deliveries times as they vary per Manufacturer. 

Returns & Exchanges:

If you received the wrong size or wish to exchange an item, it must be returned in original condition—unused, uninstalled, and with all packaging intact.

For full details, please see our Refund Policy before initiating a return.

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.

Prepared with intention.

Every product is carefully inspected and handled by our team before it ships. From fit and function to final details, we make sure each piece is ready for the outdoors ahead—so you can focus on the experience, not the gear.

Passion drives us

At SpokeX Bike Co., bikes aren't just our business — they’re our way of life. As a rider-owned and operated shop, every decision we make comes from firsthand experience on the trail, at the race, and on the open road. We know what it’s like to chase a new line, push through the pain cave, and celebrate the ride — because we live it every day.

You may also like

Recently viewed