2027 Volkl Racetiger DH R WC FIS Ski
Home
Volkl

olkl Racetiger DH R WC FIS Ski

$899.99
/
Shipping calculated at checkout.
  • In stock
  • Backordered, shipping soon
Color
Size
  • Free Domestic Shipping On Orders Over $150 (Excluding Oversized and Bikes)
  • Add To Cart For Final Price
Völkl Racetiger DH R WC FIS Flat Skis

The Racetiger DH R WC FIS is purpose-built for FIS downhill competition in the U18 and U21 segments. Its World Cup ash core, four full Titanal layers, and flat shovel are engineered around stability at downhill speeds. Every length uses a 50 m radius, while sidewall construction varies by length. The ski is sold flat and without factory structure or finish so the plate, bindings, mount, base, and edges can all be prepared to the athlete’s exact requirements.

Downhill-Specific Construction
Four full Titanal layers and the World Cup ash core provide maximum damping and support for downhill course demands.
Fifty-Meter Radius
All three lengths use a 50 m radius for the long, stable geometry required in downhill competition.
Specialized Shovel Shape
A flat shovel and tip rocker are designed around downhill engagement and high-speed tracking.
Fully Custom Race Preparation
The flat, unfinished ski allows an authorized race technician to determine the complete plate, binding, base, and edge setup.

General

Discipline
FIS downhill
Intended Athlete / Use
Qualified U18/U21 and professional athletes on closed racing and training circuits
Available Lengths
210 / 213 / 218 cm

Shape

Profile
Tip Rocker with camber through the middle and tail
Waist Width
65 mm
Length-Specific Data
Sidecut / turning radius / weight per ski without binding, where published

Length, Sidecut, Radius & Weight

210 cm
91 / 65 / 79 mm · 50 m · 2520 g
213 cm
91 / 65 / 79 mm · 50 m · 2570 g
218 cm
94 / 65 / 78 mm · 50 m

Construction

Core
World Cup Ash Woodcore
Technologies
Four full Titanal layers; downhill-specific flat shovel
Sidewalls
Full Sidewall ABS at 210 and 213 cm; Full Sidewall Phenol at 218 cm
Base
P-Tex 2510 sintered race base
Factory Finish
No base structure and no factory finish; intended for custom race preparation

Mounting

Included
Flat skis; binding plate and bindings not included
Binding Setup
Plate, binding mounting, adjustment, and release testing must be completed by an authorized race technician before use
Drying and Daily Care
Wipe snow and moisture from the skis, plate interfaces, and edges after every training or race session. Dry everything thoroughly with a soft cloth and avoid prolonged storage in a sealed bag or on a wet vehicle rack.
Race Base and Edge Preparation
Inspect the bases and edges for impact damage, burrs, rust, and edge separation. Have a qualified race technician establish and maintain base structure, wax selection, and edge angles for the athlete and course. Do not alter factory edge angles without an intentional tuning plan.
Construction Inspection
Check the topsheet, sidewalls, edges, core, and Titanal-related structural areas for cracks, delamination, or deformation after hard impacts. Remove damaged skis from use until an authorized race technician has assessed them.
Plate and Binding System
Inspect the race plate and mounting screws regularly for looseness, damage, or contamination. Plate and binding mounting, boot-sole verification, adjustment, and release testing must be performed by an authorized race technician. Recheck the complete system after any boot, plate, binding, or mounting change.
Closed-Course Use
These race skis should be used only within their intended athlete category, course environment, and applicable competition rules. Confirm length, radius, plate, binding, and setup compliance with the athlete’s coach or race technician before competition.
Off-Season Storage
Clean and dry the skis, have the edges inspected, and apply protective storage wax to the bases. Store them in a cool, dry place away from sunlight, heaters, and heavy loads, with the binding system checked again before the next season.

Shipping Policy

Components:

All component items (wheels, drivetrains, suspension, brakes, etc.) ship within 4-7 business days of purchase.

Bicycles:

Complete bikes typically ship within 2–3 weeks due to build, tuning, and inspection times. You will receive tracking information as soon as your order is ready to ship.

 Gear & Apparel:

Outdoor Gear and apparel orders (helmets, jerseys, gloves, etc.) ship within 5-21 business days. Please reach out to us with the most up to date deliveries times as they vary per Manufacturer. 

Returns & Exchanges:

If you received the wrong size or wish to exchange an item, it must be returned in original condition—unused, uninstalled, and with all packaging intact.

For full details, please see our Refund Policy before initiating a return.

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.

Prepared with intention.

Every product is carefully inspected and handled by our team before it ships. From fit and function to final details, we make sure each piece is ready for the outdoors ahead—so you can focus on the experience, not the gear.

Passion drives us

At SpokeX Bike Co., bikes aren't just our business — they’re our way of life. As a rider-owned and operated shop, every decision we make comes from firsthand experience on the trail, at the race, and on the open road. We know what it’s like to chase a new line, push through the pain cave, and celebrate the ride — because we live it every day.

You may also like

Recently viewed