- In stock
- Backordered, shipping soon
- Free Domestic Shipping On Orders Over $150 (Excluding Oversized and Bikes)
- Add To Cart For Final Price
Keep the TF Shell Mitt stowed away when conditions are dry, layer over top of your preferred contact gloves to stay dry when needed. The Lightweight TF Shell Mitt is a packable backup shell for active pursuits — a lightweight waterproof + breathable shell mitt that lives in your pack until conditions turn wet, then layers over your favorite liner gloves for full hand protection. Built with the Trigger Finger design for added dexterity and TPU overlays in key wear areas for durability, the TF Shell Mitt is the insurance policy your hands need when the weather turns.
Stow When Dry, Layer When Wet
"Keep the TF Shell Mitt stowed away when conditions are dry, layer over top of your preferred contact gloves to stay dry when needed" — the TF Shell Mitt is designed as a backup weather shell, not a primary glove. The packable, lightweight design lives in your pack or jacket pocket until conditions turn wet, then layers over your favorite contact gloves (liner gloves, softshell gloves, or any thin glove) for full waterproof + breathable hand protection. The system approach is more versatile than a single glove — you can swap liners based on conditions.
Waterproof + Breathable Shell Construction
The shell fabric is waterproof and breathable (per the product specifications), providing reliable weather protection without the bulk of a fully insulated glove. The waterproof/breathable construction seals out rain and snow while allowing perspiration vapor to escape, keeping hands dry from both external moisture and internal sweat during active use.
Trigger Finger Design for Dexterity
"Trigger Finger design for added dexterity" — the Trigger Finger design is a specialized mitten/glove construction where the index finger has its own separate enclosure (rather than being fully enclosed in the mitten), allowing the rider to use the index finger for tasks that require more dexterity — adjusting bindings, using a phone, operating a camera, or gripping poles with more precision. The Trigger Finger design is a hybrid between a full mitten and a glove, offering the warmth of a mitten with the dexterity of a glove.
TPU Overlays in Key Wear Areas
"TPU overlays in key wear areas for durability" — TPU (thermoplastic polyurethane) overlays are reinforced sections of durable material on the high-wear areas of the mitt (typically the palm, fingertips, and thumb). The TPU overlays add abrasion resistance where the mitt contacts the most wear — poles, ropes, rocks, and edges — extending the life of the mitt and preventing premature wear through the shell fabric.
Layering System for Versatility
"Layer over top of your preferred contact gloves" — the TF Shell Mitt is designed to work as part of a layering system. The rider picks their preferred liner gloves (thin for high-output activities, medium for moderate, thick for cold) and the TF Shell Mitt goes over the top for weather protection. This system approach is more versatile than a single insulated glove because you can adjust the layering based on the conditions and activity intensity.
Packable and Lightweight
As a backup shell, the TF Shell Mitt is designed to be packable and lightweight — easy to stash in a pack, jacket pocket, or climbing harness without adding noticeable weight. The shell-only construction (no insulation) keeps the mitt light and compressible, making it the ideal "just in case" piece for any winter kit.
Active Use Construction
The lightweight shell construction is designed for active use — running, hiking, climbing, skiing, or any activity where the rider might generate heat and want a shell layer for weather protection without the bulk of an insulated glove. The shell is breathable enough to allow perspiration vapor to escape during high-output activities, while the waterproof construction seals out rain and snow.
Outdoor Research Quality and Infinite Guarantee®
Built by Outdoor Research — a Seattle-based outdoor gear company with decades of experience in technical apparel — the TF Shell Mitt is backed by OR's Infinite Guarantee® (lifetime guarantee against defects in materials and workmanship). The combination of waterproof construction, TPU durability, and the Trigger Finger design makes the TF Shell a long-term investment for any active winter kit.
General
Category
Waterproof Shell Mitt (Layering System / Backup Weather Protection)
Type
Lightweight shell mitt (no insulation — designed to layer over liner gloves)
Use
Backup weather protection for active winter pursuits (hiking, climbing, skiing, trail running)
Construction
Construction
Shell (no insulation — designed to layer over liner gloves)
Waterproofing
Waterproof + Breathable shell fabric
Dexterity
Trigger Finger design (index finger has its own enclosure for dexterity)
Durability
TPU overlays in key wear areas (palm, fingertips, thumb for abrasion resistance)
Features
Packability
Lightweight and packable (stows in pack, jacket pocket, or harness)
Use Case
Layer over contact gloves for waterproof protection (not a standalone glove)
Best For
Variable conditions, "just in case" weather protection, layering systems
Sizing
Size Range
Unisex sizing (specific range available on the OR product page — typically XS to XL)
Sizing Method
Hand length (measure from the base of the palm to the tip of the middle finger)
Cleaning
Wipe down the TF Shell Mitt with a damp cloth to remove dirt, salt, and debris. For tougher stains, hand wash in cold water with a mild technical fabric wash (like Nikwax Tech Wash or Grangers Performance Wash). Avoid harsh detergents, bleach, or fabric softeners, which can damage the waterproof membrane and the TPU overlays. Rinse thoroughly and allow to air dry.
Drying
Allow the TF Shell Mitt to air dry at room temperature after use. The shell fabric dries quickly due to the lack of insulation. Remove any snow or excess water from the interior before storing. Don't use direct heat (radiator, hair dryer, dryer) to dry the mitt — high heat can damage the waterproof membrane and the TPU overlay bonding.
DWR Refresh
The shell fabric has a DWR (Durable Water Repellent) treatment that helps water bead off the surface. When water stops beading (the fabric "wets out" and water soaks in), refresh the DWR with a spray-on or wash-in product (like Nikwax TX.Direct or Grangers Performance Repel). Apply per the product instructions, then tumble dry on low heat or iron on low with a cloth barrier to activate the DWR.
Storage
Store the TF Shell Mitt in a cool, dry place when not in use. The mitt can be compressed for storage without damaging the shell fabric or TPU overlays. Avoid leaving the mitt in direct sunlight for extended periods — UV exposure can degrade the waterproof coating and the TPU material over time. Don't store in a hot car — extreme heat can damage the membrane and adhesives.
Repair
Small tears or holes in the shell can be repaired with a patch kit (like Tenacious Tape) or by an outdoor gear repair service. For TPU overlay damage or membrane failures, contact Outdoor Research for warranty service — the Infinite Guarantee® covers defects in materials and workmanship for the life of the product.
Shipping Policy
Components:
All component items (wheels, drivetrains, suspension, brakes, etc.) ship within 4-7 business days of purchase.
Bicycles:
Complete bikes typically ship within 2–3 weeks due to build, tuning, and inspection times. You will receive tracking information as soon as your order is ready to ship.
Gear & Apparel:
Outdoor Gear and apparel orders (helmets, jerseys, gloves, etc.) ship within 5-21 business days. Please reach out to us with the most up to date deliveries times as they vary per Manufacturer.
Returns & Exchanges:
If you received the wrong size or wish to exchange an item, it must be returned in original condition—unused, uninstalled, and with all packaging intact.
For full details, please see our Refund Policy before initiating a return.
