EDC LITE, Tool
EDC LITE, Tool
EDC LITE, Tool
EDC LITE, Tool
OneUp Components

EDC LITE, Tool

The included 9 function Multi Tool contains your most used tools and 
is designed to live inside your stem/steerer tube.

Never get stuck without a Multi Tool on a ride ever again.

 

⬢  2, 2.5, 3, 4, 5, 6, 8mm   
   T25 Torx 
▬   Flat Head Screwdriver



  • Light weight (Adds just 75g to your bike)
  • VERY easy to install in less than 5 mins. 
  • Available in  6 colours (Black, Red, Blue, Green, Orange, Purple, Turq)
  • No need to remove your star nut or thread your steerer tube.
  • Colour matched to our Composite Pedals, Grips and Handlebar Decals.
  • Run a single Multi Tool on all your bikes (extra carriers are $15 each)

 

 

ENSURE YOUR FORK IS COMPATIBLE -VERY IMPORTANT

Incompatible forks: Giant Overdrive 2 Forks. Rock Shock 35 Gold Forks, Cannondale Lefty Forks. Carbon Steerers

STEERER TUBE INNER DIAMETER

The inner diameter of your steerer tube must be at least 24.1mm. OneUp is not currently aware of any tapered steerer tubes that do not meet this requirement. If fitting unsure, you can check this by inserting the tip of the EDC Lite into the steerer tube above the star nut BEFORE lowering the star nut position.

STEERER TUBE LENGTH  

Most forks are compatible, except for a small number of forks with very short steerer tubes. For the following cases your fork steerer tube length must meet the minimum length requirement.

  • Fox except Fox 38 = 190mm (7.5") min
  • Fox 38 = 210mm (8.25") min
  • RockShox Forks  = 210mm (8.25") min

    Measure from the underside of your fork crown to the top of your spacer stack, or top of your stem if you are not running any spacers above your stem.

    Regular price$57.80
    /
    Shipping calculated at checkout.
    Color
    • Low stock - 3 items left
    • Inventory on the way

    This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.

    You may also like

    Testimonials

    Thanks again for the amazing service ! I cannot thank all the guys at SpokeX for building me a killer set of wheels. They were super easy do deal with and I would gladly support them again ! Super great experience and I think I will have to order another set for my DH bike !! You guys rock !

    Damon B.

    After having wheels backorder for nearly 5 months I canceled the order and ordered new wheels through SpokeX. My wheels arrived less than 2 weeks later just in time for my Bentonville trip. These guys earned my business for sure!

    Michael C.

    Dope shop, staff is on point .. Got some good info on wheels, hubs, etc. They even worked on the same wheel off my bike three times until they figured out it was the off brand valve I used that was causing the slow leak...replaced it with a Muc-Off and been rolling good since.

    Albert J.